How to care for wool products
1. Hand wash max, t - 400 C, Use a cleaner for wool. It is possible to soak for 20 min.
2. Do not twist the product under any circumstances, you can squeeze out excess water in a towel or in a lump.
3. Dry vertically to allow water to flow, not on the battery. It is possible on a horizontal surface in the straightened form on a towel.
4. Iron in the mode ** wool with steam, t is not higher than 1600C, give shape to the product.
Rules of care for felted slippers made of natural merino wool
Like any wool product, slippers can get shaggy. The way to get rid of the pellets is simple – you just need to shave your slippers with a special machine or an ordinary razor.
Natural wool slippers require gentle care, as well as other products of the same format. If the slippers get dirty while wearing, then they can be washed. Do not worry, they are already hand-felted and won't lose their shape if you follow certain rules.
Instructions for washing slippers
- Pour some warm water into the basin. The water temperature should not exceed 30 degrees, if the temperature is broken, then the slippers can sit on several sizes when washing, in other respects, like any other wool product.
- Put on disposable gloves. They are needed not only to protect your hands from detergent, but above all to reduce the friction of your hands on the felt.
- For soaping, you can use a special detergent for washing wool, but it’s better and more economical to take a simple laundry soap.
- Wet the slippers in a little water, lather them with soap and start rubbing the dirty areas. Especially thoroughly wash and rub inside the slippers, periodically rinsing the dirty soap in a basin.
- If there is a pattern on the slippers and you are afraid to break it, then do not worry, it is already well sealed with a felting machine and rubbed by hand with soap. You have to lather it up again and rub it well with your gloved hand.
- Rinse the slippers under warm running water. After you have washed your slippers in the basin, they should get rid of the soap. Put them under the tap with warm running water or just gently rinse the slippers in clean water in a basin.
- Rid the slippers from excess water. To make the slippers dry faster, they should be placed in the washing machine and set the "spin" mode.
- Give shape to the slippers. After we have rid the slippers of excess water, after spinning in a centrifuge, it is necessary to give the slippers their previous shape. Take out the slippers, put them on the foot and smooth them, the felt is elastic at this time and you can sit the slippers in the shape of your foot.
- Dry the slippers. In the summer, it is enough to put the slippers in the sun and during the day they will dry out, if you wash the product in a colder time, then the slippers can be dried on the battery.
